sale@rundex.com
|
Sign in
|
Join us
|
English
RFQs
View Cart
0
Products
Discrete Semiconductor Products
Transistors - FETs, MOSFETs
Transistors - FETs, MOSFETs - RF
Transistors - IGBTs - Single
Transistors - IGBTs - Hybrid
Transistors - IGBTs - Modules
Diodes - Zener - Single
Diodes - Zener - Arrays
Diodes - Rectifiers - Single
Diodes - Rectifiers - Arrays
Diodes - Bridge Rectifiers
Diodes - RF
Diodes - Variable Capacitance (Varactors)
Current Regulation - Diodes, Transistors
Transistors - Bipolar (BJT) - Single
Transistors - Bipolar (BJT) - Single, Pre-Biased
Transistors - Bipolar (BJT) - Arrays
Transistors - Bipolar (BJT) - Arrays, Pre-Biased
Transistors - Bipolar (BJT) - RF
Thyristors - SCRs
Thyristors - SCRs - Modules
Thyristors - TRIACs
Thyristors - DIACs, SIDACs
Transistors - JFETs
Transistors - Programmable Unijunction
Transistors - Special Purpose
Power Driver Modules
Circuit Protection
Circuit Breakers
Electrical, Specialty Fuses
Fuseholders
Fuses
Gas Discharge Tube Arresters (GDT)
Ground Fault Circuit Interrupter (GFCI)
Inrush Current Limiters (ICL)
Lighting Protection
PTC Resettable Fuses
Surge Suppression ICs
Thermal Cutoffs (Thermal Fuses and Breakers)
TVS - Diodes
TVS - Mixed Technology
TVS - Surge Protection Devices (SPDs)
TVS - Thyristors
TVS - Varistors, MOVs
Inductors, Coils, Chokes
Adjustable Inductors
Arrays, Signal Transformers
Delay Lines
Fixed Inductors
Wireless Charging Coils
Integrated Circuits (ICs)
Audio Special Purpose
Clock/Timing
Data Acquisition
Embedded
Interface
Linear
Logic
Memory
Power Management (PMIC)
Specialized ICs
Magnetics - Transformer, Inductor Components
Bobbins (Coil Formers), Mounts, Hardware
Ferrite Cores
Magnetic Wire
Power Supplies
AC AC Wall Adapters
AC DC Configurable Power Supplies (Factory Assembled)
AC DC Configurable Power Supply Chassis
AC DC Configurable Power Supply Modules
AC DC Converters
AC DC Desktop, Wall Adapters
DC DC Converters
Industrial, DIN Rail Power Supplies
LED Drivers
Power over Ethernet (PoE)
Relays
Automotive Relays
Contactors (Electromechanical)
Contactors (Solid State)
High Frequency (RF) Relays
I/O Relay Module Racks
I/O Relay Modules
Power Relays, Over 2 Amps
Reed Relays
Relay Sockets
Safety Relays
Signal Relays, Up to 2 Amps
Solid State Relays
Transformers
Audio Transformers
Current Sense Transformers
Isolation Transformers and Autotransformers, Step Up, Step Down
Power Transformers
Pulse Transformers
Specialty Transformers
Switching Converter, SMPS Transformers
Power Modules
AC DC Converters
DC DC Converters
LED Drivers
Motors, Actuators, Solenoids and Drivers
Electric Actuators/Cylinders
Motor Driver Boards, Modules
Motors - AC, DC
Solenoids
Stepper Motors
Circuit Protection, Distribution and Backup Power
DC to AC (Power) Inverters
Line Conditioners
Power Distribution, Surge Protectors
Uninterruptible Power Supply (UPS) Systems
Anti-Static, ESD, Clean Room Products
Anti-Static, ESD Bags, Materials
Anti-Static, ESD Clothing
Anti-Static, ESD Device Containers
Anti-Static, ESD Grounding Mats
Anti-Static, ESD Straps, Grounding Cords
Clean Room Swabs and Brushes
Clean Room Treatments, Cleaners, Wipes
Ionizer Equipment
Modular ESD Desks, Workstations
Monitors, Testers
View All Products
Home
Manufacturers
RFQ
PCB/PCBA
Blog
Home
All products
Labels, Signs, Barriers, Identification Systems
Labels, Stickers, Decals - Preprinted
Length:
1.969" (50.00mm)
(4)
3.150" (80.00mm)
(6)
2.717" (69.00mm)
(4)
1.339" (34.00mm)
(2)
2.165" (55.00mm)
(3)
3.780" (96.00mm)
(1)
2.283" (58.00mm)
(1)
3.346" (85.00mm)
(2)
2.559" (65.00mm)
(5)
4.134" (105.00mm)
(1)
6.299" (160.00mm)
(18)
2.362" (60.00mm)
(3)
2.913" (74.00mm)
(1)
4.724" (120.00mm)
(5)
5.512" (140.00mm)
(88)
4.567" (116.00mm)
(9)
2.756" (70.00mm)
(20)
3.543" (90.00mm)
(2)
3.937" (100.00mm)
(1)
2.598" (66.00mm)
(2)
3.701" (94.00mm)
(2)
Width:
0.945" (24.00mm)
(2)
1.496" (38.00mm)
(6)
1.929" (49.00mm)
(1)
3.150" (80.00mm)
(6)
1.024" (26.00mm)
(4)
2.717" (69.00mm)
(92)
1.339" (34.00mm)
(26)
1.890" (48.00mm)
(2)
1.772" (45.00mm)
(1)
5.118" (130.00mm)
(3)
1.811" (46.00mm)
(1)
1.575" (40.00mm)
(1)
2.283" (58.00mm)
(2)
3.858" (98.00mm)
(8)
5.512" (140.00mm)
(4)
2.756" (70.00mm)
(2)
1.181" (30.00mm)
(6)
3.543" (90.00mm)
(13)
Language:
English
(89)
Spanish
(7)
English/French
(35)
Italian
(9)
French
(40)
Legend (Text):
-
(2)
UPS VOLTAGE IS PRESENT WHEN POWER IS OFF. Contact may cause electrical shock or burn. Turn off and lock-out UPS output power before servicing.
(5)
VOLTAGE IS PRESENT WHEN POWER IS OFF. Contact may cause electrical shock or burn. Wait at least 60 seconds and check for residual tensions before servicing.
(2)
Crush Hazard. Stay clear of machine. Follow lockout procedures before servicing.
(3)
Wear ear protection.
(2)
Hazardous voltage enclosed. Voltage or current hazard sufficient to cause shock burn or death. Disconnect and lock-out power before servicing.
(2)
Crush and cut hazard. Serrated blade for film cutting. Wear protective gloves.
(1)
Avoid injury. Do NOT operate with guard removed, gears or belts exposed. Replace guard before operating machine.
(6)
Moving parts can crush and cut. Keep hands away from moving parts.
(8)
Low clearance. Watch your head.
(3)
Hazardous chemicals located within this enclosure.
(2)
Crush hazard. Exposed gears or moving parts can cause severe injury. Lock out power before removing guard or doors.
(2)
Magnetic field. Pacemaker wearers are not allowed in this area.
(2)
Flying objects. Danger of eye injury. Wear safety glasses.
(4)
ARC-FLASH & SHOCK HAZARD. Appropriate personal protection equipment required.
(4)
No step. Do not step, stand or sit on this surface. May cause injury and equipment damage.
(1)
Body harness and lifeline required for entry.
(2)
Wear head protection.
(2)
SUITABLE FOR USE ON CIRCUIT DELIVERING NOT MORE THAN ...kA AT ...V
(1)
Keep hands away from chamber area while in operation.
(3)
Sharp edges. Watch your fingers.
(3)
For continued protection against risk of fire, replace only with the same type and ratings of fuses.
(3)
Moving parts can crush and cut. Do not operate with guard removed. Follow lockout procedure before servicing.
(1)
Do not disconnect under load.
(2)
CRASH HAZARD. Keep hands away.
(2)
Laser radiation. Do not stare into beam.
(2)
Arc Flash and Shock Hazard. Appropriate PPE Required. Do not operate controls or open covers without appropriate personal protection equipment. Failure to comply may result in injury or death. Refer to NFPA 70E for minimum PPE requirements.
(3)
Risk of entrainment. Keeps hands clear.
(4)
Leakage current of PE conductor greater than 10 mA.
(2)
Crush hazard. Do not operate on moving parts.
(6)
Wear safety shoes.
(4)
Electric Shock Hazard. Main disconnect switch does not remove UPS output power. Read and understand operator's manual before turning off UPS and servicing.
(5)
Exposed moving parts can cause severe injury. Do not operate machine without guards. Follow lock-out procedures before servicing.
(2)
Read and understand operator's manual before using this machine. Failure to follow operating instructions could result in personal injury or damage to equipment.
(5)
Hazardous voltage. Disconnect power before servicing. Hot surface. Wear protective gloves. Read and understand operator's manual before operating equipment.
(2)
This door is locked by a security system. To allow opening, it must be necessary to DISCONNECT the main switch. For closing, it is necessary to close all the doors involved in system before.
(1)
Pressurized fluids hazard. Pressure relief device located in this area.
(1)
Hazardous voltage will cause severe injury or death. Turn off power and lock out before service.
(1)
Potential Arc-Flash hazards exist while working on this energized equipment.
(8)
Keep hands clear. Moving parts.
(2)
Arc Flash and Shock Hazard. Appropriate PPE Required. Do not operate controls or open covers without appropriate personal protection equipment. Failure to comply may result in injury or death. Refer to CSA Z462 for minimum PPE requirements.
(2)
THE SECONDARY SYSTEM(S) MUST BE CONNECTED TO A GROUND ELECTRODE IN COMPLIANCE WITH THE NATIONAL ELECTRICAL CODE.
(3)
Wear protective gloves.
(5)
If an overload or a fault current interruption occurs, circuits must be checked to determine the cause of the interruption. If a fault condition exists, the current-carrying components should be examined and replaced if damaged, and the integral current s
(2)
Risk of electric shock. Machine Supply Circuit Disconnect is connected to the machine supply circuit conductors in back-fed.
(2)
REPLACE FUSES WITH SAME TYPE AND RATING.
(2)
FOR CONNECTION TO A SOLIDLY GROUNDED WYE SYSTEM ONLY.
(2)
Crush hazard. Keep hands away.
(2)
Risk of eye injury. Eye protection required.
(2)
Fall hazard
(2)
Wet end. Slippery surface.
(2)
Avoid injury. Beware of tripping.
(2)
MAIN CIRCUIT BREAKER IS BACK-FED
(2)
Magnetic field. Can be harmful to pacemaker wearers.
(1)
DISCONNECT POWER BEFORE REPLACING THE FUSES.
(1)
THIS EQUIPMENT HAS BEEN EVALUATED WITH REGARDS TO SAFETY FROM ELECTRICAL FIRE AND SHOCK HAZARD ONLY. THE GAS AND MECHANICAL FEATURES ARE NOT COVERED AND ARE SUBJECT TO APPROVAL BY THE INSPECTION AUTHORITIES HAVING JURISDICTION.
(1)
MORE THAN ONE LIVE CIRCUIT. SEE DIAGRAM.
(2)
To maintain overcurrent, short-circuit, and ground-fault protection, the manufacturer's instructions for selection of overload and short circuit protection must be followed to reduce the risk of fire or electric shock.
(2)
THE SECONDARY SYSTEM(S) MUST BE CONNECTED TO A GROUND ELECTRODE IN COMPLIANCE WITH THE CANADIAN ELECTRICAL CODE.
(3)
EXPLOSION HAZARD. SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY.
(1)
THIS COMPONENT IS BOTTOM FED
(2)
WHEN MOUNTING ON OR OVER A COMBUSTIBLE SURFACE, A FLOOR PLATE OF AT LEAST 1.43 mm GALVANIZED OR 1.6 mm UNCOATED STEEL EXTENDED AT LEAST 150 mm BEYOND THE EQUIPMENT ON ALL SIDES MUST BE INSTALLED.
(1)
TOXIC CHEMICALS may be present. Skin contact may be hazardous to your health. Wear appropriate personal protective equipment.
(1)
Protective clothing required in this area.
(2)
Disconnect power and follow lockout procedure before servicing. Do NOT operate with guard removed. Only uthorized personnel in this area. Read and understand operator's manual before using the machine.
(2)
Ensure casters are locked before operating.
(1)
EXPLOSION HAZARD. To prevent ignition of flammable or combustible atmospheres, disconnect power before servicing.
(1)
Falling objects.
(1)
CAPACITOR CIRCUIT. Wait 5 min after opening, then short capacitors before handling.
(1)
Arc Flash and Shock Hazard. Do not open doors or remove covers without following the requirements of NFPA 70E for safe work practices and PPE. Failure to heed this warning may result in severe injury or death.
(1)
Arc Flash and Shock Hazard. Appropriate PPE Required.
(2)
Hazardous voltage. Multiple power sources may be present. Disconnect all electric power including remote disconnects before servicing.
(2)
Shear hazard. Moving parts can cause severe injury. Lock out power before inspection or service.
(2)
Possibile boiling liquid splashes.
(1)
Do NOT use compressed air for cleaning.
(1)
Unit under pressure. Discharge before disassembling. Use only nitrogen.
(1)
Wear head protection. Wear ear protection. Wear safety shoes. Wear protective gloves. Read and understand operator's manual before the use.
(1)
Color - Legend:
Black, Yellow
(128)
Black, Red, Yellow
(17)
Black, Blue, Yellow
(33)
Black, Blue, Red, Yellow
(2)
Filter:
Labels, Stickers, Decals - Preprinted
Color - Background : Orange, White
Ratings : ANSI, CSA, UL Rated
180 Records
Image
Part
Manufacturer
Description
MOQ
Stock
Action
TK.LBQ.W0550.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LBQ.W0040.AEFC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0120S.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0120S.AFC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0120.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0010.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0280.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0240.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0250.AFC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0260.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0140.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0530.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0380.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0280.AEFC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0960.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0970.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0370.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0950.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0100.AFC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LB.W0250.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
1
PDF
RFQ
8,500
In-stock
Get Quote
TK.LBQ.W0550.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LBQ.W0040.AEFC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0120S.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0120S.AFC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0120.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0010.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0280.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0240.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0250.AFC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0260.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0140.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0530.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0380.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0280.AEFC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0960.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0970.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0370.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0950.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0100.AFC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
TK.LB.W0250.AEC
Tekima North America, Inc.
WARNING LABEL, 12 PCS/PACK
Stock : 8,500
Get Quote
RFQ
1 / 9 Page, 180 Records
Previous
Next
*
Part:
Manufacturer:
Package:
*
Request Qty:
Target Price (USD):
Massive In-Stock SKUs
Ever-growing categories covering all component needs
Lightning-Fast Shipping
Smart warehousing enables same-day dispatch
Strict Quality Control
Traceable materials, authorized & genuine guaranteed
Transparent Pricing
One-stop component sourcing with transparent pricing
Support
Online Support
QQ
+86 13502804383
Inquiry
Inquiry Service
Send Inquiry
Feedback
Collapse
Top
Expand Support